Sunday, June 1, 2014

T-1

It's been a couple months since I updated my blog.  T-1 academics are complete, and we have slowly been chipping away at the T-1 syllabus.  The picture below is from my dollar ride.  Since T-1's are big and hold lots of fuel, two students usually fly with one instructor.  The student not flying sits in the jump seat and acts as a safety observer, and the two students swap seats halfway through.  The other student in the picture is Kramp, my flying partner.


Right now we are in the "transition" phase of training.  Here we learn how to fly the T-1.  It is a lot bigger than the T-6, and flies differently.  Most time in this phase is spent working on traffic patterns and landings.  The MOA work in the T-1 isn't hard, and I cna do the profile in under 10 minutes, so as a result I don't spend much time on it.  It consists of a steep turn, vertical S, traffic pattern stall recoveries, slow flight and unusual attitude recoveries.  Obviously no aerobatics like in the T-6.

Getting back to what a typical sortie looks like- Brief time is 2+00 before a flight.  Transition briefings don't take that long and we always finish real early.  We step 1 hour prior to takeoff time.  Whoever is flying second gets the walkaround, while the student flying first takes care of a few checklists.  Ground ops take a bit longer than the T-6, but if you practice you get quick at them.  This has the added benefit of making the IP think you're sharp.  If you have a solid brief and your ground ops run real smooth the IP will have a favorable impression of you before you even leave the ground.  

Anyway, then we will take off and usually stop at a MOA on the way to an outbase so the first student can do his/her MOA work. Then we will fly to an outbase for patterns.  Since we carry so much gas we can leave the local area and go to places like Midland, Laredo, Gray AAF (Ft Hood) or Dyess AFB (Abilene, TX).  All those places are like a 4 or 5 hour drive, but take 30 to 40 minutes in a T-1 at 23 to 24 thousand feet.  The first student will do an instrument approach into the field, and then fly a series of patterns, most of them closed.  Landings at 30 flap, 10 flap, no flap are practiced, as are single engine landings and single engine go arounds.  Time permitting the student will break out of the pattern for a visual straight in or a tactical overhead pattern.  Students will swap seats, and the other student will fly his patterns and fly the jet home, with a MOA delay on the way back so he can do his MOA work.  The reason we stop in MOAs twice is thats how the checkride profile is flown.  Sorties typically last for 3.2 hours, so with the 2 hour brief and 1 hour debrief a flying event takes half of your 12 hr duty day.  Sims dont take nearly as long, as the breifs are 1+15, the sortie is like 2.6, and the debriefs are short.

Below is a picture from my 30th birthday.  I originally wasn't scheduled to fly, but a student got sick and I got to take his place.  Better to turn 30 in a cockpit than a cubicle.

I have one more flight and then my transition checkride.  Hopefully that will go smoothly.  The next phase of training is the navigation phase.  Here we get to fly all over the place, and go on out and backs, or out and snacks as they are called- fly someplace and get lunch or dinner, and fly home.

Wednesday, April 2, 2014

T-6 Complete!

Elvis Flight, Class 14-15.

I have finished the T-6 syllabus. Six months, 256 hours of academics, 35 simulator events, 57 flight events, and probably a lot of other meaningless statistics have lead me to the completion of Phase 2.  It was a difficult six months, with the hardest being the first month on the flightline.  The picture above is our flight photo, and was taken Friday (note our blue "Friday" undershirts) March 29, on our last full day in our T-6 flight room.  Most of us will be going to T-1's together, with two going to T-38's.  We will join up with the other flight of students in Class 14-15 over in the nice, new T-1 building, where we will enjoy amenities such as windows and cell phone service.  A welcome change from our T-6 flight room.

Phase II wrapped up last week with my formation checkride.  It wasn't my best checkride performance, but it didn't need to be as long as I passed.  Looking back on the T-6 syllabus, formation was by far the most difficult for me, but also the most rewarding.  With only 14 flights to figure it out, it took me until the last few to get confident about it- and it wasn't until my formation solo that I felt like I really knew that I was doing (probably because I had to figure it out one way or another- there wasn't an IP in the back of the plane as a safety net).

Formation was the most rewarding because it epitomizes teamwork and mutual support; its no longer you in your plane by yourself.  You have someone 10 feet off your wing.  If you're lead you are responsible for your wingman, and your wingman is responsible (among other things) for backing you up.  As lead, it's your job to clear for traffic, plan (keep the profile moving along, don't drag his eyes right through the sun when they are locked onto your plane or otherwise screw your buddy- not that we didn't screw each other every now and then by accident), monitor your wingman, navigate and communicate with air traffic control.  This starts when you're still on the ground.  You will look your wingman over when he taxis out of parking, and he will look you over, making sure your flaps are down, lights are on and all your panels are buttoned up.  You'll give him a thumbs up, and get one in return.  Its desirable, even in the air, to communicate with visual signals rather than over the VHF radio, as much as possible.  Normally, you will do a wing takeoff.  This is where you take off at the same time, with 20 feet of lateral spacing, with #2 30 degrees aft.  Hand signals to run the engine up, a few head nods, with the final one signalling brake release, and off you go.   You will both get cleaned up, look each other over to make sure gear is up and flaps are retracted and pass a thumbs up when you visually confirm that (you verify these things with indications inside your own plane, but you will look each other over to make sure- mutual support- people have oversped flaps by leaving them out before), and then lead will navigate the flight to the working areas.  There you take your wingman through the profile you planned (pretty much the same profile every flight), and then hand the lead off to him so he can run the profile as lead with you on his wing, and then he'll bring you safely home (one guy leads out and the other leads back, then for the next flight you switch).  Wing is not without responsibilities, however.  He is responsible for not hitting lead, keeping lead in sight, being in position and on frequency, and backing up lead.
Above is a four ship echelon turn. We don't do four ship formations as students.  This is a file photo I found that was taken about 10 years ago when the base first got the T-6.  It took a while to get comfortable with this type of turn because you're looking right at the bottom of lead, you have to put in a bunch of power because your turn circle is bigger, and if he unloads you will definitely hit him.  A technique I got from an IP was to just man up for 15 seconds, and it will all be over. That technique worked really well.  You are 40 feet away, but its close enough to count the rivets on the bottom of his plane.

So formation exemplifies teamwork...whats the point of it?  It seems dangerous to have two planes flying so close together so its normal to wonder what benefit it actually provides.  The whole entire point of formation is the concept of mutual support.  This idea was reinforced when on a sortie, the other ship in the formation had an indication of the hydraulic problem (hydraulic fluid low).  We were right there to make sure he wasn't leaking fluid, and we could confirm his landing gear was safely down.   backing him up by reading through the checklist in our jet to make sure he didn't do anything that could be a problem.  We then flew back with him so he could land.  It was reassuring and confidence building to have a wingman when flying over West Texas.  I can only imagine the boost having one in a combat environment would provide when people are actively trying to kill you.

As I mentioned before, formation was the most challenging part of the T-6 syallabus for me.  My main problems were with wingwork and extended trail.  Wingwork is essentially flying lazy 8's, which are a series of rolling turns up to 90 degrees of bank and 35 degrees pitch attitude up and down where #2 maintains the fingertip position, with 10 ft spacing from lead.  In general, I tended to shy away as #2 by not matching lead's bank angle.  Once I was able to suppress this self-preservation tendency, I got much better. As a result I would drift wide and aft, 15 feet, and then 20 feet.  The video below, made by some AF guys at Pensacola, show a lot of the stuff a typical formation sortie will contain, and at 1:31, go through some wingwork.

https://www.youtube.com/watch?v=LNlEJhVJ_wI

Its harder than it looks, and involves anticipating roll rates and power changes as turns into and away from #2 are initiated- a lead climbs or descends he slows down or speeds up, and as he turns into and away the turn circles are different- requiring #2 to constantly adjust his power.   I had no problems with route formation, where you try to keep 2 to 4 ship widths from lead (so you can easily see his visual signals). For some reason it was the extreme attitudes of wingwork that I found difficult.  They really shouldn't have been any more difficult than straight and level flight though, because no matter what the attitude of the plane is, you fix the position the same way.

This is another cool picture that I didn't take, but it shows how close the other planes are when in fingertip.

The other problem I had was with extended trail.  This is essentially an exercise where you will use lead, pure, and lag pursuit to maintain position within a certain cone behind lead.  It is much like dog fighting.  ET level 3 culminates with over the top maneuvers where you can do barrel rolls, loops, cloverleafs or cuban 8's, and #2 has to follow you, but he cant get ahead of you or get closer than 300 feet (both are unsafe). My tendency was to use too much lead pursuit, and then hesitate to point directly at lead (this would give pure pursuit and stop me from closing).  Again, this was another self preservation tendency that was actualy more dangerous than it was safe.  We managed to get it all worked out by the checkride.  My checkride partner, another guard/reserve guy who is going to fly heavies, and I worked it out so we would give each other the easiest things to follow, and it ended up working out nicely.

A formation briefing board.  A successful formation flight begins with a thorough briefing so everyone in both aircraft are on the same page as to what you are going to do.

Often times when the students ran through their profiles and got everything done they needed to do, the IPs would have some IP ET level 3.  This got intense, with lead trying to either floor kill #2, or make him get slow (resulting in him having to call "knock it off").

That's how the program is designed though. It is designed to be efficient.  Just when you get good at something you move on to something else. In this case, it is a whole new aircraft that is more complex than the T-6.

I also flew two low level sorties, and I wish there were more in the syllabus. These are where you plan, accounting for winds, a low level route where you aim to be at your objective at your planed time on target.  On my first, where we aren't allowed to use the GPS, I think I was 20 seconds earlier.  On the second, where we can use the GPS (which is very handy because it tells you your groundspeed, which is how to plan low levels), I was within one second. Technically, these are supposed to be flown at 500 feel above ground level (AGL) at 210 KTS groundspeed although we routinely flew lower than that.  The route everyone flies is SR-283, which is just north of Lake Amistad.  At 8 minutes, most of the IPs will let you hang a left, check MAX power, and fly up the Pecos River Canyon.  This was probably the most fun I've ever had in a plane.  At times, I was closer to the river below than I was to the top of the canyon, with the canyon wall only a few hundred feet to the side.  We will do formation low levels in the T-1 in the next phase, but it definately wont be below terrain, pulling 3 to 4 g's.

Our Track Select is on April 1st.  This is where everyone finds out which track they will go on; either fighter/bomber, airlift/tanker or helos. This isn't really a big deal for the guard/reserve guys because we already know what we will be flying, but for the active duty guys it will decide what kind of planes they will be flying for most of their careers.  I know that I'l be flying the T-1A Jayhawk.  Academics start tomorrow...

T-1, or Tone, for short.




Monday, February 17, 2014

Instrument and Navigation Block Complete


On Friday I wrapped up the instrument phase of primary training.  This phase of training was flown from the back seat (with the exception of the navigation flights) by reference entirely, with the exception of takeoffs (students only take off from the back seat, not land) and departures, to the flight instruments.  

Overall I would say instrument flying really clicked with me, and the syllabus does a god job getting you ready for the flights by exposing you to pretty much everything in the sim first.  Unfortunately our instruments academics were in October, so some review was necessary prior to our flights.  I forget exactly how many instrument sims are in the syllabus, but it had to be about 20. It was enough that I felt I was reasonably proficient after the 10 instrument flights you get before the checkride.   I also finished up my nav sims, low level sim, and formation sim.  I am now T-6 sim complete.

This block of training also included six navigation flights.  The nav flights are usually done over the weekend on a cross country.  Myself and three other students from my class did that a few weeks ago. 

Since there are so few working jets, XC planes have to first be used during the day for local sorties, and then have to get new tires prior to being ready to be taken cross country.  Because of this, they usually aren't ready until 4 or 5 pm on Friday.  Ours was ready early, and we were up by probably 4. First, my IP And I went North to Lubbock (the other guys went to Midland, not sure why my IP wanted to go to Lubbock).  After that, we went to Fort Worth, quickly.  It was getting late and we were hungry so we left power at MAX and got there in probably an hour, flew two approaches, and then landed.
Below is a picture of our plane at Ft Worth Alliance Airport.




The next day we did a VFR leg up to Fayetteville, AR.  This flight was flown solely by references on the ground which I planned out that morning from a sectional chart.  It was nice to actually look at all the scenery as we flew through the foothills of the Ozark Mountains.



There was an awesome BBQ place in Fayeteville. It was worth the trip.


After Fayetteville, we flew a night time sortie to Houston for the night. It was a cold flight.  Its about 360 miles to Houston, so we flew higher than our previous legs at FL230.  Even with the heat cranked all the way up, it was cold up there. With the power at about 70% (you couldn't get much more torque than that out of the plane at that altitude), it probably took us an hour and twenty minutes.  Not bad for 360 miles. The next morning we flew to College Station where I shot three approaches, stopped for gas, and then headed back to Laughlin.  Overall it was a fun weekend and I was really starting to get the hang of the nav flights, but just like all other phases of training so far, just when you start to feel like you are getting good at something you move on to something new and you're back to not knowing wtf you're doing again.

As I mentioned I had my instrument checkride on Friday.  I had a late flight the day before and couldn't show up until 16 minutes before my brief time so as not to violate my 12 hours of crew rest.  This was probably good, as my flightmates helped me by putting together a mission data card, signed out Maverick County Airport for my RNAV approach, and got my ORM card filled out. I just showed up, listened to formal brief, looked over the stuff that they prepared and then went up to check flight, filled out a boldface and went on my checkride.  I thought I flew decent, and I ended up doing really well, and gradewise, it was my strongest checkride performance yet.  But, just like everything else in pilot training, just when you think you're getting good at something...


I start the formation phase of training tomorrow.  The picture below is from the sim. It shows the "fingertip" position.   Everyone says formation flying is awesome.  You get to go up and rage with the other guys in your class.  The learning curve is pretty steep, from the steady hand required to hold fingetrtip, or provide a stable platform for #2, to the hand signals (hand signals are used to the max extent practical), and radios.  I'm told wing work, where you fly in fingertip formation, 10 feet apart, is the hardest part, especially the takeoffs.  I understand the wing landings are even harder than the wing takeoffs.  The part I'm looking forward to is extended trail. Everyone says that its awesome. Finally I'll get to fly aerobatics again, either chasing #1, or as lead. The big thing is that now its not just about me anymore, there's another plane that you have to be mindful of at all times, and that you are both there to provide mutual support to one another.

Formation is the last phase of T-6 training.  Up to this point, I have about 64 hours in the T-6.  I'll get 16 form flights, including a checkride.  I'll also get two low level flights.  I'm on the schedule to do one of those on Wednesday.  I'm really happy I'm doing those now, and not during the instrument phase because if its during the instrument phase you're supposed to practice instrument approaches when you exit the low level route.  If you're done with instruments you get to do whatever you want.  I think I'll get one of the T-38 MOAs that's over the low level route and fly some advanced aerobatics.  That stuff is a little more exciting than the radar pattern back at Laughlin...

Sunday, January 12, 2014

Pt 2- First Update in a While (Thanksgiving Through Final Contact)

When I got back from Thanksgiving there was only three weeks until Christmas break.  I had seven flights to complete until my Final Contact Checkride.  Unfortunately weather and a fleet-wide technical problem with the aircraft prevented this from happening.

Anyway, in the block of training following the Mid-Phase checkride you have seven more flights until the final contact checkride.  These 7 flights introduce advanced aerobatics and include two area solos where you get to take the plane to the MOAs by yourself and practice your advanced aerobatics.  The advanced aerobatics are intense, but extremely fun once you get good at them.

The area solos were also pretty awesome. The previous two solos were in the pattern.  This time I got to take a $5 million jet off station by myself to practice advanced aerobatics.  I didn't scare myself but I was a too fast over the top of a cloverleaf and screamed downward, glancing at the altimeter watching it pass 7,000 (the floor of my MOA).  I think I pulled 6 g's through the bottom of that one, and I busted the floor by about 300 feet- you'll hook a checkride for that.  My second area solo was the Friday before Christmas break, and needless to say all the IPs wanted to get out Del Rio as soon as possible, so the last go of the day consisted of six students going on an area solo since solos obviously don't need an IP.  What could possibly go wrong with that?  It ended up being fine.

During this time I also started having instrument sims. Instrument flying is done when there is no reference with the ground (such as when you're in clouds).  This first block of instrument sims consists of practicing instrument maneuvers, and introduces the student to some instrument approaches in the local area.  Instrument flying is challenging in that it requires precise control of the aircraft to maintain altitude, heading, speed, and attitude.

Christmas break was a nice time off.  I spent most of my time in upstate NY and was able to make it to camp in Vermont for three days.  The pictures below are from that trip.  The first one is at my buddy Chuck's lodge that's about 1.5 miles from camp in a straight line.  Its a cool, off the grid place thats a bit more comfortable than camp. In the picture below is Matt, a college buddy that I'm still good friends with, Alida who i've known for over two years now, another guy named Matt who I met through Chuck who used to fly F-111's and C-5's, and who helped me get a foot in the door at Westover, and his friend Susie and dog Roxy.



I've only seen one other porcupine before.  This guy was chewing up trees around camp, so they are considered nuisance animals.  Its amazing how slow they are.  I could've shot him but figured I'd leave him alone.

Matt taking a nap after some evening reading at Camp. 


Chuck stopped out to visit us at Camp.


Of course Chet is still in bed, probably trying to avoid helping cleaning.



Anyway, the two weeks of Christmas break went by way too fast.  I returned to Laughlin to find that I was a bit rusty.  I would only have three flights until final contact to chip the rust off.  I had final contact on Friday and passed.  The winds shifted and it was a Runway 31 day.  I last saw 31 on my mid-phase checkride almost two months ago.  I should've hooked for at least three things, but got extremely lucky.  If you recall in my last post I discussed how "pattern delaying" was a smart move because the IP would usually fly the recovery for you.  This was awesome because the recovery for RWY 31 is different than that for 13. On 13 there's a point called "Rio" that has an altitude restriction of 2,100-3,100 feet- and I always fly it at 3,100 feet.  The corresponding point on a 31 day a point called "Creek" that has a hard altitude restriction of 2,100 feet that, despite studying the arrival plate that morning, I totally would've missed- but luckily I wasn't flying the plane.  

On my emergency landing pattern, this time a "simulated forced landing" where the engine is set to 4-6% torque to simulate a feathered prop, you have no use of the engine if you're off profile (obviously you can use it if things get unsafe).  Anyway, I rolled off of the low key position probably a bit early given that winds were calm and I got up to 143 knots according to the check pilot.  I saw 140.  The speed limit for the gear is 150.  He said I had 2 more knots until he would've taken the plane.  

And finally, I almost opened the canopy with the engine running when I was back in chocks after the flight.  The check pilot threw me a bone on that one.  I am now complete with the "Contact" phase of T-6 training and have flown about half the hours in the T-6 syllabus.  I'm up to 40 hrs, and the program usually takes about 85.

I have my first instrument flight tomorrow.  On these flights the student sits in the back seat with a hood blocking the view outside. 

Hopefully I'll be able to update this blog more frequently.




First Update In A While (Intial Solo Through Thanksgiving)

Its been a long time since I last updated my blog.  Partly because I've been real busy, and partly because I just haven't gotten around to it.  I think I'll make this one a two-part update.  First, I'll cover through Thanksgiving.

My last update was just after my initial Solo.  The pace of learning definitely picked up since then.  Following that initial solo, I began the 4300 block of training, which introduced "baby" aerobatics (aileron roll, loop, and split-S).  This block also included a pattern only solo where you were completely on your own from the time you left the flight room to the time you got back- no IP shadowing you on the walk around and strap in).  It was definately cool to step to the jet all by yourself, but once I was in the plane and had it started up I couldn't help but have this feeling that I was forgetting something.  This seemed to be the case for the subsequent two solos I had.  If I was forgetting something it must not have been a big deal because in all three cases I brought the plane back in one piece.

Anyway, the 4300 block of training includes six flights where, as I mentioned, we are introduced to aerobatics. These maneuvers are intended to make you better at flying the plane, and they did.  This block also prepares you for the first checkride of pilot training- the mid-phase checkride which will occur in six flights.  The point of this checkride is to make sure you are progressing and are safe to take the palne by yourself to the military operating areas (MOAs), perform aerobatic manuevers, and come home safely.  This checkride is the most hooked (failed) checkride in UPT.  At Laughlin, 43% of students hook it, or so we were told.  I was lucky enough to have my checkride scheduled for the day before Thanksgiving.

I'll briefly explain what a checkride consists of.

First, you go up to the check flight (a group of IPs who don't know you and only give checkrides- the idea is they will be objective).  First, you fill about a "Boldface" which is a sheet of paper where you have to fill in all the immediate action items for nine emergencies exactly verbatim, and a bunch of ops limits for the engine, aircraft systems, speeds/altitudes, and prohibited maneuvers.  Even though I've filled these out literally hundreds of times you can't help but be a little nervous when you hand it in.  You also have to hand in your Dash 1 (the aircraft's "user manual," if you will), in flight guide and checklist that you are responsible for maintaining and keeping up to date with write ins and changes.  Hooking for boldface of pubs (Dash 1, in flight guide, and checklist) is pretty much the worst thing you can possibly do.  For this reason its a good idea to check all your pubs the day before and do a page count.
After you hand in the boldface the check pilot gives you his check pilot brief were he basically says he will be quiet in the back and only respond to mandatory "both" checklist items, and that a perfect sortie is not required, but rather he wants to evaluate if you are safe and able to fly within course training standards.

Then you'll step and go fly the profile you were given to fly.  These profiles consist of a normal landing, a pattern breakout, a no flap landing, a precautionary emergency landing, and some area maneuvers such as stalls, slow flight,a spin recovery and aerobatic maneuvers. Luckily my profile included aileron roll and a Split-S, and not a loop.  Loops can be tricky at first because you have to really use the rudder if you want to come through the bottom of the loop with the aircraft pointed in its original heading.  That turbine engine at MAX power applying 2,900 ft-lbs of torque to the 97" propeller really tries to torque and yaw the plane to the right.

Anyway, my flight went relatively well.  I smartly "pattern delayed" to get the landings and pattern work out of the way before heading to the MOA.  I made the mistake of not getting my breakout (where traffic forces you have to climb out of the pattern and reenter elsewhere).  Usually if you get all your pattern work in the check pilot will take the plane from you and fly the recovery for you because a.) they get bored and b.) to limit your chances of screwing something up.  Anyway, I came back and I was number 11 in the pattern so I immediately regretted not accomplishing that breakout when I pattern delayed.  I've never been in a pattern so busy. I ended up doing my breakout where I got stuck at VFR entry (with two guys in my flight- one also on a checkride and another on his pattern solo).  After three more breakouts at VFR entry I was able to sneak in and fly an overhead pattern to a full stop.  Thank god that was over.

After the flight you give your in flight guide and check list to the check pilot and go wait in your flight room for him to call.  In 30 minutes I got the call to go upstairs to check flight.  Next you are given an emergency procedure (EP) where you have to talk your way through  (in a very specific and pragmatic manner).  I got a confirmed fire light on departure.  Pretty straight forward.  After the EP, its time for general knowledge.  The check pilot will ask you questions about the T-6 and flying it.  Then they will usually ask you what is your favorite aircraft system and then have you draw it out. Luckily I did not have to do this because it was 5pm the day before Thanksgiving.  GK was pretty straightforward.  The check pilot then debreifed the flight.  I got a "Good" overall.  I'll take it.

The next day I flew to Washington, DC for Thanksgiving at my sister's.  It was nice to see my sisters, parents, and niece and especiallty nice to see Pop, my grandfather.
It was a nice four day break from pilot training.

The amazing thing about Thanksgiving break was it was the first time i'd really left Laughlin in almost four months.  This may sound strange but I didn't realize it was November already.  Being so busy trying to keep up with the training program combined with the warm climate of West Texas, made it hard for me to keep track of the passage of time.  What's even crazier is it has been 7 months since I left my old life in NY, but it feels like it was like a month ago.

Thanksgiving in Arlington, VA




Sunday, November 17, 2013

Hey, Lt Nonna, make this one a full stop. I'm going to hop out, and then take'r back up.

Its been almost a month since we've started flying.  As of Friday I had twelve flights under my belt. The thirteenth flight, per the syallabus, is a solo.  I was a little apprehensive at first of taking up a $5 million jet by myself.  The idea that they would let us do that so soon seemed a little crazy, especially considering at one point in the pattern you're at about 400 feet going about 230 knots, banked 75 degrees and pulling 2.5 g's on the turn to crosswind before you can climb to pattern altitude.  I guess they figure if things get bad enough there's always an ejection handle in between your legs you can pull if you need to get out, not that there's no risks associated with that option.

So anyway, a few people in the class had already soloed and on Friday afternoon it was my turn. The solo is basically two sorties in one. First, you go up with your instructor pilot and do a normal landing, a pattern breakout, an emergency landing pattern, a go around, and a no flap landing.  If that's good, you land and taxi back to chocks.  He hops out, the crew chief ties the rear cockpit down, you trade nametags with your IP (his nametag has wings on it, and you need wings to fly) and then you go for it.

The crew chiefs know when someone is doing an initial solo.  They also know that your buddies will be waiting for you so they can throw you into the dunk tank. Finally, they know if you make it back to the flight room without getting dunked, everyone owes you a case of beer.  Before closing the canopy and starting up its usually a good idea to coordinate with them to have a getaway truck waiting at the jet when you get back.  More on that later.

I started the plane up, taxied, took off and flew four patterns.  I pulled closed for the first two, which saves the time of flying all the way around the pattern.  On the third I took a lap and did the outside pattern, landed, requested closed, and did another closed pattern to a full stop.  I probably could've stayed up longer than 0.4 hours, but everything was going well and I didn't want to push my luck.  Keeping the flight short also caught my flightmates off guard.  When I landed I hopped out of the jet, got into getaway truck that was waiting, took off my harness and g-suit, and got dropped off at at a side door where I was able to sneak into the fight room.

Of course I wasn't getting away with that.  I was escorted outside to the dunk tank and promptly dunked.  See video here.... http://www.youtube.com/watch?v=h54MjuSVuEA&feature=youtu.be

Got dunked....


The picture below is from last week.  It was after my buddy Paul's solo. 






Look, no one in the back seat!


Now that the initial solo is complete I begin a new block of training.  This block includes aerobatics, which should be fun.  I have also started instrument sims.  Basically in these we do the things we learned about during instrument academics, and will represent most of the flying I'll be doing when I move on to T-1's.  I'll likely have my mid-phase checkride before thanksgiving.  This is the first of four checkrides you have in Phase 2 (T-6's).  The next week and a half will be spent studying for that, in addition to preparing for contact flights and instrument sims.

Sunday, October 27, 2013

First Week In Jets!

This week marked an important milestone in my fledgling Air Force career.  I had my dollar ride in a T-6.  A dollar ride is someone's first flight.  I'll try to describe it here, but words can't really capture how awesome/overwhelming it was.  The instructor I had was previously a T-38 guy, so I knew it was going to be a fun ride. I'll talk more about it when I discuss flying later.

A bit about the T-6.  The T-6 is a new, 5 million dollar plane which replaced the 50's era T-37 in the early-mid 2000's.  It is much more powerful with its 1,100 hp turboprop.  It cruises at 200 knots, can easily go 240, and tops out at 316. It can pull -3.5 to +7.0 g's, and has performance compared to the P-51 Mustang of WWII.  It's wingspan is about 33', and it weighs 6,500 lbs fully loaded with 1,100 lbs of fuel, of which probably 700 will be burned on a typical 1.3 to 1.5 hr mission.

This week was also the first week in the flight room.  I'll walk you through what seems to be a typical day.  Luckily (for us, not for them) some guys from Class 14-13 got washed back into our class due to budget reasons.  They have been really helpful getting us up to speed on all that goes along with being in the flight room for twelve hours a day.  I'll take a minute to go over a typical day.

We are given a schedule the night before telling us what time to show up.  Its usually between 0700 and 0730, and sometimes depends on what we have scheduled that day, or what we had the day before.  We are required to get 12 hours of crew rest, and are limited to a 12 hour duty day, so if we stay later than 7:30 pm, we can't report in any earlier than 12 hrs later the next day.  Anyway, the class meets up outside the building to ensure we all start our 12 hour day at the same time.  A minute prior to our show time, we go into the flight room and start preparing the morning's formal brief. The formal brief consists of informing the class on the day's weather, expected ops for the day, op notes, previous day's runway supervisory unit comments for each particular student, and an emergency procedure brief.  The briefer, and the emergency procedure briefer rotate daily.  Following the brief is a mad rush to get the people scheduled for the first 'go' ready for their mission brief.  This involved creating a mission data card, which has the mission objective,training objectives (goals you want to accomplish, i.e. maintain altitude within 150', no improper radio transmissions, etc), mission profile (where you want to go, and what you plan to do when you get there), expected weather,  and JOKER and BINGO fuel levels.  If you're flying the first go, you then sit down with your instructor pilot (IP) and brief what you are going to do, otherwise you study stuff you should've read the night before and make sure popcorn is ready by the time the guys who flew the first go get back.  As for the brief, some of this is briefed by the student, other parts by the IP.  You will usually step (finish the brief, go put on your g-suit and harness, and test your mask, ad then go to the supervisor and get your assigned aircraft) a half hour before your scheduled takeoff time.  After that you will go outside and get a ride to your jet if its far, or walk if its close. 

Once you get to the jet you will check the documentation for things like ensuring all the required inspections are either not overdue, or signed off if they are overdue, etc.  Then its time to hop up on the wing, do some cockpit checks, a preflight inspection of the exterior, and finally strap in. Once you are all strapped in and have followed your checklist to check all the switches in the cockpit its time to close the canopy and start the engine.  This is simple thanks to a computer that pretty much does everything for you.  Once started, its time to turn on what you need (most importantly the air conditioning) and do some final checks before taxiing to the runway.  Once there you do some more checks, arm your ejection seat, call for takeoff clearance, and then take off. 

This is where it gets exciting.  When the power is moved to MAX, there is a short delay while the turbine spools up, but once it does the plane goes!  Its off the ground in about 1,500 feet.  The landing gear and flaps are retracted a few seconds later, and by now the plane is going 130 knots, on its way to cruising speed of 200.  Stuff happens so fast on departure that it takes some getting used to.  My IP did this part of the flight during the dollar ride, but I got to fly pretty much the whole mission for my second and third flights.  During my third flight on Friday I noticed time slowed down a little, as I was getting used to flying the plane and some tasks that used to require conscious effort were now becoming second nature.  Anyway, we will leave Laughlin and fly 18 or so miles to the Southeast. There are blocks of airspace assigned for military operations that we use to practice maneuvers.  They are fairly big (~14 nautical miles long by maybe 10 nautical miles wide, depending on which one you get assigned to) but at 200+ knots you go almost 4 miles a minute, so they aren't as big as they seem, and three of them have the Rio Grande as a border, and you don't want to bust that boundary that otherwise you are in Mexico, and you have to wear a sombrero the next day.

For my dollar ride, MOA work consisted of an intro to the T-6.  My instructor demonstrated a roll and a loop, and then I got to do one. We pulled 4.5 g's, which is harder than I thought it would be and is border-lining on becoming uncomfortable.  To put it in perspective, your body weight, if you weigh 200 lbs, now feels like 1,200 lbs.  Needless to say you really feel yourself getting pushed into the seat.  Also being pushed downward is blood from your head.  This is counteracted by the g-suit inflating and your anti-g straining maneuver, in which you tense up your leg muscles and abdomen and push back against the g-suit, and breathe in an abrupt manner that I really can't describe in words.

Following area work, you will let air traffic control know you're ready to come back and you will an assigned arrival thats pretty straight forward.  There were clouds at or around my assigned altitude on my dollar ride and my flight on Friday. For my dollar ride they were perfect for "cloud chasing" where you get to fly through the contours of the clouds like they are valleys, sometimes rolling inverted and pulling to hug the "peaks" of the clouds below.  On Friday, however, I was inside the clouds and had my first exposure to real instrument flying.  It was a little disorienting, but it should get easier with time.

Once back in the pattern, we usually take a few laps and practice landings.  I think I'm starting to get the hang of it, but have to remember that I'm not flying a Cessna anymore, and pattern turns are to be done at 60 degrees of bank and 2 g's (which is more than you would think, and is enough to start inflating the g-suit), as this minimizes your time exposed during a turn.  There can be up to 12 jets in the pattern, all going 200 knots so this is important.

Following the mission will be a debrief where your instructor goes over what you did poorly/well, usually discusses an emergency procedure, and then tells you what to prepare for on the next flight.

While not flying time in the flight room is spent studying, making jalapeno popcorn, and on some other formal events.  These might include "Standup" where each student stands at attention and recites a note, warning or caution from an emergency procedure(EP) of the IP's choice (the required EP's for the day are assigned the previous day). If you get it wrong, you remain standing until the IP goes the rest of the way around the room and comes back to you.  While there are a lot of notes, warnings and cautions, the system is gamed by assigning certain ones to each student so we only have to know 2 or 3 each, 4 at most.  This makes it manageable.

Other than that I can't really think of too much more to talk about at this point.  I really should get back to reading for tomorrow's EP quiz.
A row of T-6's, with one airborne in the background.


Walking out to the jet for my dollar ride.


Over the rail check.
Putting on helmet, getting ready for first flight in the T-6.

Getting ready to fire up the engine.
Checking mask before my flight on Wednesday
Testing mask.